Bonjour a tous.
J’ai un petit projet a réaliser (a titre personnel) ai j’aurai besoin de conseil ou de certaine expérience :
Mon projet consiste à monter un super routeur de type SLURP :
http://www.crack-wpa.fr/forum/viewtopic.php?id=130
le matériel que je dispose est :
-Un fanless de type SOEKRIS 4801 : http://www.soekris.com/net4801.htm
Configuration :
• 233 to 266 Mhz NSC SC1100 single chip processor
• 32-256 Mbyte SDRAM, soldered on board
• 4 Mbit BIOS/BOOT Flash
• CompactFLASH Type I/II socket
• UltraDMA-33 interface with 44 pins connector for 2.5" Hard Drive
• 1-3 10/100 Mbit Ethernet ports, RJ-45
• 2 Serial ports, DB9 and 10 pins header
• USB 1.1 interface
• Power LED, Activity LED, Error LED
• Mini-PCI type III socket. (t.ex for optional hardware encryption.)
• PCI Slot, right angle 3.3V signaling only, dual PCI slot option planned.
• 12 bit general purpose I/O, 20 pins header
• Temperature and voltage monitor
• Hardware watchdog
• Board size 5.2" x 5.7"
• Power using external power supply is 6-20V DC, max 15 Watt
• Option for 5V supply using internal connector
• Operating temperature 0-60 °C
D’un HDD 80 Go connecter en IDE directement et d’une CCF de 8 Go
Et d’une carte wifi INTEL pro connecter directement sur le port mini-pci de la petite bête
-deux FONERA 2100 (VERSION 1)
Au niveau connectique rien de plus simple les deux fonera connecter en ETH sur la soekris
Merci à vous.